- Evaporator
- Condenser
- Cascade systems
Benefits
- Compact
- Easy to install
- Self-cleaning
- Low level of service and maintenance is required
- All units are pressure and leak tested
- Gasket free
Design
The brazing material seals and holds the plates together at the contact points ensuring optimal heat transfer efficiency and pressure resistance. Using advanced design technologies and extensive verification guarantees the highest performance and longest possible service life. Asymmetric channels provide optimal efficiency in the most compact design. This results in low refrigerant charge or lower pressure drop on the water or brine side, reducing the CO2 footprint.
Designed for high-efficiency applications, such as those applications with high evaporation temperature and low water/brine pressure drop. This results in reduced environmental impact and lower costs. The integrated distribution system ensures an even distribution of the refrigerant throughout the plate package. Based on standard components and a modular concept, each unit is custom-built to meet the specific requirements of each individual installation. Suitable with most HFC, HFO and natural refrigerants.
Examples of Connections
- External Thread
- Internal Thread
- Soldering
- Welding
Technical Data
Cover plates: Stainless steel
Connections: Stainless steel
Plates: Stainless steel
Brazing filler: Copper
A measure (mm): 13 + (1.98 * n)
A measure (inches): 0.512 + (0.078 * n)
Weight (kg)2: 2.1 + (0.18 * n)
Weight (lb)2: 4.63 + (0.4 * n)
1. n = number of plates
2. Excluding connections
Volume per channel, litres (gal): (S1-S2): 0.11 (0.029)
(S3-S4): 0.073 (0.019)
Max. particle size, mm (inch): 1 (0.039)
Max. flowrate1 m3/h (gpm): 14 (62)
Flow direction: Parallel
Min. number of plates: 10
Max. number of plates: 100
1. Water at 5 m/s (16.4 ft/s) (connection velocity)
Dimensional drawing
Measurements in mm (inches)
